Double-motor Three-station Mechanism CJ8-6

Summary

CJ8-6 operating mechanism can be used for closing and opening ZF23-126, ZF□-126 as well as isolating switches, grounding switches and load switches of which the required torque is equivalent to that of the above switches.

The mechanism has three stations. One mechanism can operate one isolating switch and one grounding switch, to realize closing and opening of the isolating switch as well as the closing and opening of the grounding switch. The mechanism has a manual operation mode and an electric operation mode at the same time.

Operating Conditions

1. Ambient air temperature: upper limit +60℃, lower limit -30℃

2. Altitude: no more than 3,000m

3. Air pressure: no more than 700Pa (equivalent to the air speed of 34m/s)

4.Occasions without fire hazards, explosion hazards, heavy pollution, corrosive gas and strenuous vibration

Main Technical Parameters

1. the output angle of this organization can be customized according to the requirements of the user.

2. the output torque of 120 136N after M.

3. rated voltage, switching time is less than 2S.

4. Technical parameters of energy storage motor

5. CSK Magnetic Blow-out Switch

One-open & one-close (or two-open & two-close), the rated breaking current of a contact is 10A under AC220V, as well as 3A under DC220V.

6、Relay type (available or unavailable according to user requirements)

Relay type model: 3TH42-44; producer: Siemens; power voltage: DC220V (AC220V), DC110V (AC110V)

7. Wiring Terminal

Current capable of passing continuously is 10A.

8. F10 Auxiliary Switch

The rated breaking current of the contact is 10A under AC220V, as well as 5A under DC220V.

9. Secondary Socket

24-pin, 32-pin, 64-pin secondary sockets are available.

Outline Structure Schematic Diagram of Mechanism

The structure is integrally flat in appearance. With the height of less than 150mm, the mechanism is very suitable for the requirements of shared GIS on the mechanism. Both the opening/closing operation and opening/closing indication of the mechanism are shown on a plane. A hole is formed in the output shaft on the installation surface of the mechanism, so the output shaft of the switch in the mechanism can be connected with the output shaft of the mechanism; moreover, the transmission system of the switch cannot be exposed, which both is beneficial to sealing and achieves attractive and elegant appearance of the switch. The secondary wiring of the mechanism is output by an industrial connector which is in a plug-in type, facilitating in electrical connection between the mechanism and the switch.

Ordering Instructions

If you have other special requirements, please produce after negotiation with manufacturers.